Skip to content



Proper Maintenance Guide: How to Clean Your Baby Brezza Formula Pro Advanced - Goldtex

Proper Maintenance Guide: How to Clean Your Baby Brezza Formula Pro Advanced

The Baby Brezza Formula Pro Advanced is a popular and convenient appliance that automates the process of preparing formula for baby. In this blog post, we will guide you through the proper maintenance steps to ensure the functionality and accuracy of your Baby Brezza Formula Pro Advanced.

Goldtex Blog Baby Brezza formula pro maintenance

Daily Cleaning

Maintaining a clean funnel is of utmost importance for the accurate dispensing of your Formula Pro Advanced. To ensure proper hygiene, follow these steps for daily cleaning:

  1. Funnel and Funnel Cover: After every four bottles prepared, it is crucial to clean the funnel thoroughly. Begin by removing the Funnel and Funnel Cover by gently pulling them out and downward. Please note that for daily cleaning, there is no need to remove the Powder Container parts.

  2. Washing the Funnel and Funnel Cover: Wash the Funnel and Funnel Cover with hot soapy water, ensuring all surfaces are thoroughly cleaned. Rinse them well and allow them to air dry completely before reassembling.

  3. Cleaning the Powder-Dispensing Hole: Take a dry paper towel or a soft, clean cloth and wipe down the Powder-Dispensing Hole on the underside of the Powder Container. This will help remove any spilled powder or milk residue from the machine. Ensure the area is clean and dry before proceeding.

  4. Fresh Water Container: To maintain freshness, it is recommended to replace the water in the water container daily. Tip: To minimize waste and help with daily reminders, only fill the water container with the amount you anticipate needing for the day.

Remember, before initiating the daily clean, thoroughly wash your hands and sanitize any surfaces that will be involved in the cleaning process. By following these daily maintenance steps, you can ensure the proper functioning and accuracy of your Formula Pro Advanced.

Deep Cleaning

To maintain the optimal performance of your Baby Brezza Formula Pro Advanced, it is essential to clean it thoroughly. While the manufacturer recommends giving a thorough clean monthly, we suggest cleaning the pieces in image 1 every 2-3 days to ensure accurate formula dispensing, particularly if your baby has special needs.

Baby Brezza Formula Pro Parts to Clean 

Handwashing: Ensure all parts shown above are hand washed using warm soapy water. Thoroughly rinse each part and allow them to air dry completely before reassembling.

Monthly Descaling Instructions: How to clean baby brezza formula pro advanced with viniger

Preventing Mineral Scale: To prevent mineral scale buildup in the water heater of your Formula Pro Advanced, follow these simple steps:

  1. Removing and Filling the Water Tank: Remove the Water Tank from the machine and empty its contents. Fill the Water Tank with 600ml of distilled (clear) vinegar and 600ml of sterile or pre-boiled cooled water.
  2. Placing the Water Tank and Cup: Place the filled Water Tank on the Base of the machine. Position a cup larger than 300ml under the funnel to catch the liquid.
  3. Selecting and Dispensing Water: Press the "ml" button and select "300ml." Then, press the "water only" button to dispense 300ml of the solution into the cup.
  4. Emptying and Continuing: Empty the cup and place it back under the Funnel. Press the "water only" button again to dispense another 300ml. Repeat this step until the entire solution is used.
  5. Unplugging and Allowing Settling Time: Unplug the machine, remove the Water Tank, and empty it. Allow the machine to sit for 4 hours to ensure proper descaling.
  6. Refilling and Rinsing: After 4 hours, wash, rinse, and fill the Water Tank with sterile or pre-boiled cooled water up to the max line. Place the Water Tank back on the base.
  7. Running Rinsing Cycles: Plug in the machine, position a cup to catch 300ml of water, and use the "water only" button to run a 300ml cycle. Dispose of the water in the cup. Repeat this step until you have run the entire tank of water through the machine. The "Low Water" indicator turning on indicates completion of the rinsing process.
  8. Refilling and Normal Use: Refill the Water Tank with sterile or pre-boiled cooled water and return to normal use with your Formula Pro Advanced.

How to Test Baby Brezza Formula Pro

In addition to regular cleaning, it's important to test the amount of formula being dispensed by the Baby Brezza Formula Pro Advanced. By performing this simple test, you can ensure that your baby is receiving the correct amount of formula.

  1. Sterilize a Measuring Cup: Before each test, sterilize a measuring cup to collect the dispensed formula. This will help you accurately measure the amount.
  2. Perform Weekly Tests: Once a week, press the formula button on the Baby Brezza directly into the sterilized measuring cup. Measure the amount dispensed and compare it to the desired quantity. This will allow you to identify any discrepancies and take appropriate action.
  3. Troubleshooting: If you notice any significant deviations in the dispensed formula amount, you may need to recalibrate the machine. Refer to the manufacturer's instructions for guidance on recalibration or contact their customer support for assistance.


Proper maintenance is crucial to ensure the accurate functionality of your Baby Brezza Formula Pro Advanced. By cleaning the machine every third day and testing the dispensed formula weekly, you can provide your baby with the precise amount of formula they need. Remember, regular maintenance is especially important for babies with special needs. Always refer to the manufacturer's instructions and seek support if you encounter persistent issues. With the right care and attention, your Baby Brezza Formula Pro Advanced can be a reliable tool in simplifying your formula preparation routine.


Previous article How to Choose the Right Baby Bathtub: What to Look For?
Next article Saving Money on Baby Essentials: Tips and Tricks for Smart Shopping at a Baby Store

Leave a comment

Comments must be approved before appearing

* Required fields